Is this a question bank?
Yes, but it is organized as an interactive practice system rather than a static archive. Questions are grouped by exam, subject, and topic.
FRIED ENGINEERS · EXAM PRACTICE
Engineering Exam Practice Questions
Practice engineering and STEM exam questions with detailed solutions and interactive reasoning. Choose what you are preparing for and start solving.
Exam-focused•Interactive questions•Detailed solutions
CHOOSE YOUR EXAM
What are you preparing for?
Only practice sets with useful content go live. Future exams can be added here without creating thin indexed pages.
PRACTICE LIVE
FE Exam Practice Questions
Engineering fundamentals and discipline-specific FE practice with detailed reasoning.
99 questions available · Start practicing → COMING SOON
GATE Practice Questions
Engineering topic practice set planned for a future release.
Practice set in development COMING SOON
ESAT Practice Questions
STEM admissions practice set planned for a future release.
Practice set in development COMING SOON
TMUA Practice Questions
Mathematical reasoning practice set planned for a future release.
Practice set in developmentSTART SOLVING
Latest practice questions
Open a question, commit to your reasoning, test it against evidence, then unlock the detailed solution.
QUESTION01
The Plate That Peaked at 92.4 MPa, Not 110
Adding the shear stress directly to the larger normal stress gave 110 MPa. Principal stress comes from Mohr-circle geometry and was only 92.4 MPa.
Solve →
QUESTION02
The Shaft That Reached 50.9 MPa, Not 25.5
The polar moment was correct, but shear stress was evaluated at half the outer radius. Maximum torsional stress occurs at the outside surface and was 50.9 MPa.
Solve →
QUESTION03
The Bar That Stretched 0.80 mm, Not 0.40
The stress was correct, but only half the member length was used in the deformation equation. The full bar stretched 0.80 mm.
Solve →
QUESTION04
The Aquifer That Moved 1,500 ft³/day, Not 72,000
The hydraulic gradient was correct, but the plan-view area was used instead of the area perpendicular to groundwater flow. The aquifer moved 1,500 ft³/day.
Solve →
QUESTION05
The Basin That Needed 12,600 ft³, Not 21,600
The basin received 21,600 ft³ during the design interval, but 9,000 ft³ left through the outlet at the same time. Required storage was only the net 12,600 ft³.
Solve →
QUESTION06
The Watershed That Sent 60.5 cfs, Not 100.8
The rainfall intensity and drainage area were correct, but the runoff coefficient was omitted. The design peak runoff was 60.5 cfs, not 100.8 cfs.
Solve →
QUICK ANSWER
Where can I practice engineering exam questions with solutions?
Fried Engineers organizes exam practice by target exam, discipline, and topic. Each interactive question is designed to make you solve first, explain the reasoning, and then review the detailed solution instead of reading an answer key immediately.
Do practice questions include solutions?
Yes. Each completed Case File includes the engineering verdict, corrected reasoning, and the concept that should transfer to the next problem.
Can I practice one exam at a time?
Yes. Choose a target exam first, then narrow the practice by discipline and topic.